Today, I'm bringing you a very special post from the lovely, Tiffany, on how to create your own homemade lemon herb soap. She blew me out of the water with this fantastic recipe, and I can't wait to try it myself. Take it away, Tiffany!
Hi everyone! I'm Tiffany from the blog, offbeat and inspired, and I'm so excited to be posting on SK today! Soap making has been a
hobby of mine for a few years now, so when I found out Kinsey was doing a
Clean Living series, I was so excited to share some of my soaping
experience with you!
Pursuing
a homemade lifestyle can get a little overwhelming. When I first
started "going clean", I decided to focus on food and body. In the body
category, I made a list of my products ordered by frequency of use. Soap
came in at the very top of the list, so I started researching and was
SO pleased to learn that making your own healthy soap at home is not
only possible, but easy!
There
are many methods of soap making, but Cold Process is the one I like
best. The actual "making" time takes about 2 hours, and then you have to
let your soap cure for about 4 weeks. The cure time allows moisture to
completely evaporate from your soaps so that they're fully hardened for
use in moist environments like the shower. To learn more about Cold
Process (CP), check out my extensive soap making tutorial HERE.
Because there's so much to know about soaping before you get started, I
highly recommend checking out that tutorial before starting on the
following recipe!
I
created this Lemon Herb Soap recipe whilst dreaming of springtime. I
wanted something fresh with a bright zing and a light exfoliant to wake
me up during my morning shower. I LOVE how this batch turned out, so
let's get to it!
Warning:
because Cold Process soap making requires the use of lye (a caustic
substance that can cause burns), pay special attention to keeping your
skin protected, and do not inhale directly over the lye. Work in a
well-ventilated room, and keep the kids and pets away while you're
soaping!
Supplies:
Protective Goggles
Breathing Mask
Rubber Gloves
Measuring Pitcher
Digital Food Scale
Large Plastic Bowl
Liquid Thermometer
Stick Blender
Heat Proof Plastic Spoon
Aluminum Foil
Parchment Paper
Soap Mold
Ingredients
4 oz. Lye
8.5 oz. Water
8 oz. Olive Oil
11 oz. Canola Oil
9 oz. Coconut Oil
1.6 oz. Lemon Essential Oil
.5 oz. Basil Essential Oil
.5 tbsp Dried Ground Basil
1 tbsp. Dried Ground Mint Leaves
1.
Put on your rubber gloves, goggles and mask. On the scale, measure 8.5
oz. of water into the measuring pitcher. Set the scale back to 0, and
sprinkle 4 oz. of lye into the water. Stir the mixture for 30 seconds to
1 minute so that the lye is fully dissolved. Cover the pitcher with a
lid or aluminum foil and put it in a safe place to cool. You want the
solution to drop below 125 degrees F.
2.
On the scale, add the Olive Oil, Canola Oil and Coconut Oil to your
large bowl. Microwave the bowl of oils on high for 2 minutes. The
Coconut Oil needs to melt fully. You can remove the bowl while there are
still pieces of coconut oil, and stir to fully melt. Set your bowl of
melted oils on a table and let the temperature drop below 125 degrees
F.
3.
While you're waiting for your Lye Solution and Oils to come to
temperature, line your soap mold with parchment paper and tape or clip
the sides so the paper stays put. Once your Lye Solution and Oils have
dropped below 125 degrees F (but are still over 100 degrees F), add the
Lye Solution to the Oils and mix with your stick blender on a low
setting. Make sure the stick blender stays near the bottom of the bowl
to avoid splashing. You'll be mixing for about 5 minutes and the soap
mixture will be thickening. At this point, you are looking for "trace".
Trace is when the mixture has thickened to a pudding-like consistency.
If you lift the stick blender out of the mixture, it should leave light
marks on the surface.
4.
Once you reach trace, add your Essential Oils and Dried Herbs. Continue
mixing with the stick blender until the Oils and Herbs are fully
incorporated into the soap mixture.
5.
Pour your soap mixture into your mold and tap the mold on the counter a
few times to let any air bubbles escape. Even out the surface of the
soap with the back of a spoon like you would with brownies. Cover the
mold with aluminum foil and let it sit in a cool, dry place for 24
hours.
6.
De-mold your soap loaf and cut it into whatever shapes and sizes you
prefer. Once they're cut, I like to place them on a parchment-lined
cookie sheet with a label specifying the date and scent so I can keep
track of cure times. You should wait 4 weeks before gifting or using the
soap in the shower, but after 2 days the bars should be set enough to
test them out in the sink.
I
hope you enjoy this recipe and even though making your own soap may
seem intimidating, do try it out. Once you give homemade soap a whirl,
you'll never go back to store-bought!
Be sure to check out more of Tiffany's soap tutorials here!